Installation in the carport with
Outdoorpaket.
The platforms have to be forward brought in accordance
with operating instructions.
Features & Options
Horizontal parking on upper and lower level. The Liftparker
emphasizes conveniences.
*
Scope of supply
* Options
Features of the Parkline 5001
Control element
incl. emergency stop, dead man's control type with operating
instructions and wiring to switch cabinet brief
*Installation with
sliding platforms on the entrance level and one empty
space, on top level with horizontal movable platforms.
Complete with hydraulic drive elements and electrical
control.
*Width of lot 230cm
and clearance height 345cm as standard
*Width of lot modified to 240cm and wider recommended
for higher conveniences
*Mono-hub cylinder
to drive the horizontal movable platforms with looped-around
suspension elements, sliding platforms with electrical
drive
*entering wedge for
car positioning.
*Safety device to
prevent kneeling by leakage, pipe burst, fracture of
suspension elements
*Mounting on installation
and aggregate with HD-anchors, wiring with impact dowels
*Bounded anchors for increased foundation requirements
*Drive unit "Silencio"
with tubing and wiring to the installation
*Structure-borne noise package to comply with
DIN 4109 and adherence to sound insulation measure Rw
55
*Sound insulation hood to minimize airborne sound
*HVLP-oil for excessive fluctuations in temperature
*Drive plates in
trapezoid style sheeting
*Rubber profiles in the pedestrian area, width
40cm or 60cm, in pedestrian and drive area 60cm and
40cm
*Luxury sheet metal only for horizontal lots
*Corrosion prevention
"Classic" of drive plates by continuous line-galvanizing
to DIN EN 10142/10143
*Corrosion prevention "Premium" of
drive plates by individual piece-galvanizing to DIN
ISO 1461
**Corrosion
prevention "Classic Plus" of drive plates
by line-galvanizing to DIN EN 10142/10143 and coating
of the top surfaces (dependent on the market needs the
scope of supply contains zinced and powder coated sheet
metal)
*Corrosion prevention "Premium Plus"
of the drive plates by individual piece-galvanizing
to DIN ISO 1461 and coating of the top surfaces
*Sliding doors for
closing the installation in front (not necessary)
(Note: Safe guarding against shearing and squeezing
have priority and must be provided by the proprietor)
*Vehicle load: 2,0
to, length: 5m, as per vehicle data
*Extra capacity of upper platform to 2,5 to,
vehicle length up to 5,10m, length of pit plus 10cm
*A maintenance contract is recommended
Intersections/Customer's Duties
• Lockable main switch outside the installation/pit,
near aggregate at the beginning of erection, height
ca. 180cm over entrance level. (colour requirements
EN60204-1, 10.7.4 colour red)
• Supply line to main switch 5 x 1,5mm2 or to local
regulations, fuse protection 3 x 16 amp, slow fuse
• Electrical potential equalisation (foundation
grounding steel-construction to VDE 0100 T410)
• Telephone line dto by option modem and teleservice,
after consultation
• Free space for switch cabinet LBH ca 60 x 22
x 80 cm, with swing door in immediate near to installation
(max 6m) with access to the installation
• level surface (L x W) 50cm x 20cm to attach the
control unit, in direct near of the installation operational
platform area Safeguarding to DIN EN 294 Lighting to
DIN 67528, illumination of parking lots and buildings
for parking
• Foundation exactly to size, clean and dry
• Compliance with installation requirements as
per quotation
• The measurements are minimum finished dimensions.
Tolerances to part C (DIN 18330, 18331) should be considered
supplementary. Measurements in cm.
Technical alterations reserved. Alterations in the scope
of supply reserved. Version 15/2004
 |
Vehicle data (profiles as top)
Capacity: max.2000 kg, wheel load max 500 kg Car-height
H after table |
|
|
 |
Optional: Version S-class, car-length
510cm
Only for spaces in the middle Gewicht: max 2500
kg, wheel load max. 625 kg Width of space S =
250 cm Raster width B1 = 280 cm, B2 = 270 cm System
length: + 10 cm |
Measurements, Engineering & Design
The CLASSIC STYLE in PARKING: KIPPARKER N 3000 comfort
E/D
Inclined parking on upper and lower level. Space-saving
parking with more comfort.
| System
Variations |
|
|
IH |
CH |
above |
below |
R/L** |
CFR*** |
AS/space**** |
|
Uniparker N 5001 |
325 |
215 |
150 |
150 |
24* |
42* |
7,3* |
|
standard |
345 |
235 |
170 |
150 |
25* |
40* |
7,3* |
|
* by 8 segments |
405 |
235 |
170 |
210 |
29* |
40* |
7,3* |
| System Variations |
|
|
|
|
|
|
|
|
|
|
|
| |
PW |
CL |
outer B1 |
inside B2 |
3 |
4 |
5 |
6 |
R/L** |
CFR** |
AS/space*** |
| arkline N 5001 |
230 |
230 |
255 |
250 |
760 |
1010 |
1260 |
1510 |
25* |
40* |
7,3* |
| * by 8 segments |
240 |
240 |
265 |
260 |
790 |
1050 |
1310 |
1570 |
26* |
41* |
7,3* |
| |
250 |
250 |
275 |
270 |
820 |
1090 |
1390 |
1360 |
1630 |
42* |
7,9* |
| |
** R/L = required room per parking
lot in m (squared) |
| |
*** CFR = cost factor-relation
per parking lot, as relative comparison figure |
| |
**** A/S = area space per parking
lot in m (squared) |
Installation Layout gates, gate fixing max.
210cm inside height (gates no necessary, gates
available as option) Layout A: sliding doors between
the pillars, columns supplied by the employer
mind. Every 2 segment, otherwise gate-assembly
in front of the column Layout B: sliding doors
in front of pillars Layout C: sliding doors behind
pillars Of gate break supplied by the employer,
installation situation must be behind the gate
break shown a given pit length of 545cm
|
|
